Designed and manufactured in the UK, the AT15 is a very high output point source two-way loudspeaker, suitable for the nightclub/entertainment market and large Party KTV rooms, where high SPL is required. Moving beyond the conventional black loudspeaker enclosure, the AT15 features contemporary industrial design, to be seen as well as heard. Using Italian-made transducers, the AT15 features a high performance 15" ferrite driver with 3.5” voice coil, vented gap and demodulation ring, plus a 1.4" compression driver with extended HF response. This enables the AT15 to deliver very high output levels and reliability, whilst maintaining a clear, low-distortion tonal balance. The large die-cast HF horn maintains the 80° x 60° pattern control down to below the 1.2kHz crossover point. It is user-rotatable, allowing the AT15 to be deployed in portrait or landscape orientation. Twelve M10 inserts for eyebolts provide ample means of installing the AT15 in a venue. A robust die-cast pole mount is also provided, along with pocket handles on each side. Construction is no-compromise, using an 18mm Baltic birch ply cabinet, with a tough, dark grey Polyurea (PU) coating. The cloth-backed, silver coloured steel grille is zinc plated and covered in an exterior-grade powder coat, providing superior corrosion resistance. For ease of installation, the logo badge is user-rotatable, without requiring tools. A high-quality, hand-built passive crossover and 8 ohm nominal impedance allows two AT15's to be driven by one channel of the LS8Q or LS12Q four channel amplifiers. Up to eight AT15's can be driven by one LS series amplifier, which also comes pre-loaded with EQ presets and limiter settings for the A Series products. For additional low frequency output, the AT15 can be partnered with the AS218 direct-radiating subwoofer.