LS8Q - Technical Data
Channel Handling：
Outputs：
4 x Speakon NL4 / 4 Dante/AES67 TX (from local input or DSP)
Inputs：
Analog：
4 XLR female / 4 XLR male (LNK)
Digital AES3：
2 XLR female (4 xaudio channels) / 2 XLR male (LINK)
Digital Dante/AES67：
2 XLR Ethercon (4 x audio channels)
Audio：
Inputsensitivity @ 8 Ω：
2.86 Vrms with Gain 32dB
S/N (20Hz-20 kHz @8n)：
109 Typ.
Max input level：
24 dBu
Frequency Response @ 8 Ohm load：
20Hz-20kHz +/- 1.0 dB
Crosstalk (1 kHz)：
-75 dB typ.
Input impedance：
20 kΩ Balanced
CMRRd：
65 dB typ.
THD+N (from 0.1 W to Half Power)：
<0.1% (typical<0.05%)
SMPTE lMD (from 0.1 W to Half Power)：
<0.1% (typical <0.05%)
Output impedance at 100 Hz：
30 mΩ
DSP：
AD converters：
24 Bit Tandem' @ 48 kHz / 125 dB-A Dynamic Range -0.005 %THD+N
DA corverters：
24 Bit Tandem' @ 48 kHz / 117 dB-A Dynamic Range -0.003 %THD+N
Sample rate converter：
24 Bit @ 96 kHz / 140 dB Dynamic Range -0.0001 %THD+N
Internal precision：
32 bit floating point
Latency：
2.5 ms fixed latency architecture
Memory/Presets：
50 amplifiersnapshots, virtually unlimited speaker presets
Delay：
2 s (input)+ 100 ms (output) for time alignment
Equalizer：
Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover：
linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiters：
TruePower™, RMS voltage, RMS current, Peak limiter
Damping control：
Active DampingControl™ and LiveImpedance™ measurement
Display Specs：
Resolution：
480x272,4.3" diagonal
Brightness：
600 nit
Control：
Multitouch capacitive. Rotary encoder 20 steps/turn with pushbotton
Output Stage：
Max output power：
perchannel @ 8Ω(symmetrical)*：
1400 W
perchannel @ 4Ω (symmetrical)*：
2000 W
perchannel @ 2Ω(symmetrical)*：
2000 W
perchannel @ 8Ω (asymmetrical)**：
1500 W
perchannel @ 4Ω (asymmetrical)**：
2300 W
perchannel @ 2Ω (asymmetrical)**：
2000 W
@ 8 Ω bridged：
4000 W
@ 4 Ω bridged：
4000 W
Maximum unclipped output voltage：
155 V
Maximum output current：
>55 A
*All channels driven and loaded symmetrically
**All channels driven, but channels 2 and 4 at -6dB
Power & Thermal：
@ 100V：
Standby Power：
15.8 W
Idel Power：
33.7 W
1/8 Power @ 4 Ω Power：
1429 W
1/8 Power @ 4 Ω Current Draw：
14.7 Arms
1/8 Power @ 4 Ω Thermal Loss：
1550 BTU/h
@ 240V：
Standby Power：
17.2 W
Idel Power：
33.5 W
1/8 Power @ 4 Ω Power：
1327 W
1/8 Power @ 4 Ω Current Draw：
6.0 Arms
1/8 Power @ 4 Ω Thermal Loss：
1480 BTU/h
Power supply：
Universal regulated switch mode with PFC, SRM
Nominal voltage (±10%)：
100-240 VAC @ 50-60Hz
Operating Voltage：
90-264 VAC @ 50/60 Hz
AC Mains connector：
lEC C20 inlet (20 A max)
Networking：
Connectivity：
Two Gigabit Ethernet ports, integrated switch, Ethercon connectors
Supported topologies：
Star Daisy Chain
Remote interface：
ArmoniaPlus or other preferred software
Construction：
Dimensions：
483 x 381 x 88.9 mm (19 x 15 x 3.5 in)
Weight：
11.3 kg (24.91lb)
LS12Q - Technical Data
Channel Handling：
Outputs：
4 x Speakon NL4 / 4 Dante/AES67 TX (from local input or DSP)
Inputs：
Analog：
4 XLR female / 4 XLR male (LNK)
Digital AES3：
2 XLR female (4 x audio channels) / 2 XLR male (LINK)
Digital Dante/AES67：
2 XLR Ethercon (4 x audio channels)
Audio：
Inputsensitivity @ 8 Ω：
3.22 Vrms with Gain 32dB
S/N (20Hz-20 kHz @8n)：
110 Typ.
Max input level：
24 dBu
Frequency Response @ 8 Ohm load：
20Hz-20kHz +/- 1.0 dB
Crosstalk (1 kHz)：
-75 dB typ.
Input impedance：
20 kΩ Balanced
CMRRd：
65 dB typ.
THD+N (from 0.1 W to Half Power)：
<0.1% (typical<0.05%)
SMPTE lMD (from 0.1 W to Half Power)：
<0.1% (typical <0.05%)
Output impedance at 100 Hz：
30 mΩ
DSP：
AD converters：
24 Bit Tandem™ @ 48 kHz / 125 dB-A Dynamic Range -0.005 %THD+N
DA corverters：
24 Bit Tandem™ @ 48 kHz / 117 dB-A Dynamic Range -0.003 %THD+N
Sample rate converter：
24 Bit @ 96 kHz / 140 dB Dynamic Range -0.0001 %THD+N
Internal precision：
32 bit floating point
Latency：
2.5 ms fixed latency architecture
Memory/Presets：
50 amplifiersnapshots, virtually unlimited speaker presets
Delay：
2 s (input)+ 100 ms (output) for time alignment
Equalizer：
Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover：
linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiters：
TruePower™, RMS voltage, RMS current, Peak limiter
Damping control：
Active DampingControl™ and LiveImpedance™ measurement
Display Specs：
Resolution：
480x272,4.3" diagonal
Brightness：
600 nit
Control：
Multitouch capacitive. Rotary encoder 20 steps/turn with pushbotton
Output Stage：
Max output power：
perchannel @ 8Ω(symmetrical)*：
1800 W
perchannel @ 4Ω (symmetrical)*：
2700 W
perchannel @ 2Ω(symmetrical)*：
2000 W
perchannel @ 8Ω (asymmetrical)**：
1900 W
perchannel @ 4Ω (asymmetrical)**：
3000 W
perchannel @ 2Ω (asymmetrical)**：
2000 W
@ 8 Ω bridged：
5400 W
@ 4 Ω bridged：
4000 W
Maximum unclipped output voltage：
180 Vpeak
Maximum output current：
>55 Apeak
*All channels driven and loaded symmetrically
**All channels driven, but channels 2 and 4 at -6dB
Power & Thermal：
@ 100V：
Standby Power：
15.8 W
Idel Power：
33.7 W
1/8 Power @ 4 Ω Power：
1570 W
1/8 Power @ 4 Ω Current Draw：
16.5 Arms
1/8 Power @ 4 Ω Thermal Loss：
1670 BTU/h
@ 240V：
Standby Power：
17.2 W
Idel Power：
33.5 W
1/8 Power @ 4 Ω Power：
1940 W
1/8 Power @ 4 Ω Current Draw：
8.9 Arms
1/8 Power @ 4 Ω Thermal Loss：
2000 BTU/h
Power supply：
Universal regulated switch mode with PFC, SRM
Nominal voltage (±10%)：
100-240 VAC @ 50-60Hz
Operating Voltage：
90-264 VAC @ 50/60 Hz
AC Mains connector：
lEC C20 inlet (20 A max)
Networking：
Connectivity：
Two Gigabit Ethernet ports, integrated switch, Ethercon connectors
Supported topologies：
Star Daisy Chain
Remote interface：
ArmoniaPlus or other preferred software
Construction：
Dimensions：
483 x 381 x 88.9 mm (19 x 15 x 3.5 in)
Weight：
11.3 kg (24.91lb)